top of page

DIY Keepsake Trunk

Nov 4
3 min read




These DIY keepsake trunks are the perfect place to store all your baby's special memories, from baby blankets and hospital keepsakes to your baby's first pair of shoes and favorite stuffed animals. I love that these trunks not only will hold all my sons keepsakes but I was able to make them myself, and it was much more affordable than purchasing them online. The best part is you can personalize them however you'd like!


I think these trunks are going to become one of my favorite keepsakes I've made for my son. And now, as I'm pregnant with baby number two, I can't wait to also make a matching set for our daughter.


Supplies

(contains paid links)


keepsake boxes (they come in so many different colors!!)

foam board /acid free foam board

fabric ( I found mine at hobby lobby!! )

hot glue or spray adhesive

utility knife ( something to cut foam boards)

measuring tape

straight edge




How To:


Step 1: Measure the inside of your trunks


Measure the inside of your trunk to determine what size you need for your foam boards. You're going to need 6 pieces total for each trunk. I found it easiest to measure each section at a time and then test the fit out. I measured and fitted my bottom piece first, then placed it in the trunk and then measured my sides.


There was a lot of trial and error when cutting the boards and finding the right fit! Measurements will also vary depending on the trunk you decide to use.


You'll want to leave a little room on each side to account for the cotton batting and fabric you will be wrapping them in, but not too much, as you want them to fit nice and snug.


I measured and fitted my bottom piece first, then placed it in the trunk and then measured my sides.


Step 2: Cut your foam boards


Now its time to cut your boards. I used a straight edge and a utility knife to cut the boards to the size I needed. I also placed a piece of scrap wood underneath to protect my work surface.


I found this to be the easiest method of cutting, but of course do whatever works best for you.


Step 3: Cut your batting and fabric


Use your foam pieces as a guide to cut out your fabric and cotton batting. Leave enough fabric and batting on each side so you can fold everything over the back of the board.


Step 4: Wrap your boards


Each board will be wrapped first with cotton batting and then with your fabric of choice. I used hot glue to secure them, but you can also use a spray adhesive.


Pull the batting and fabric nice and tight to keep everything looking smooth and neat.


If you're planning to embroider your top piece, embroider it first before wrapping it.


Step 5: Personalize


This is the fun part where you can add a personalized touch to your trunks!


I embroidered the top piece myself. I used my Brother SE700 embroidery machine as well as a transitional 4x6.75 hoop.


If you don't have an embroidery machine, no worries! You can use fun iron on patches as well, or leave it plain.


Step 6: Place your inserts


Once you have all your pieces wrapped, it's time to place them in the trunk.


I applied carpet tape to the bottom, sides, and top of the trunk.


I found it easiest to place my bottom piece in first, then my sides. This worked for me because this is how I measured everything to fit in the beginning.


When adding my top personalized piece to the top, in addition to the carpet tape, I also added some hot glue for an extra hold as the trunk will be opening and closing.


You're all done!!


You're personalized keepsake trunk is complete!!




I'll say it, I hold on to every little thing of my sons! I'm a super sentimental person, and I know we'll want to look back at all these special keepsakes one day. I'm so excited I finally have a place to keep it all.


I hope you enjoy this DIY as much as I did!!


You can find a quick video on how I made these by clicking here


Thank you so much for stopping by and reading this post! I hope you found a little inspo for your next project!


Happy Crafting!

Sam





Comments


bottom of page